Flat suction Submersible pump SUB 8500 Easy with high efficiency
Fast to the last drop - this is how you could describe the goal of this clear water submersible pump: Because thanks to the inlet openings, both pumping out large quantities of water and shallow suction down to approx. 5 mm is possible. Effective drainage of pools, cisterns, wells or flooded cellars.
Adjustable switching height due to 2-position bracket
The float switch can be set in two positions for continuous, supervised as well as automatic operation. In automatic mode, the pump switches off automatically after reaching the minimum water level.
The submersible pump can be used for mobile or stationary drainage thanks to the practical integrated carrying handle and the low weight of only around 4 kg. With its 290 W power, a delivery head of max. 6m and the flow rate of up to 8,000 l/h, pumping out and transferring water is done in no time. The pump outlet integrated in the large pump base ensures best performance. Flexible thanks to screw-on combination connector on the pump outlet. The pump outlet has a size of 1.25 inches, which corresponds to about 41.9 mm.
Note: The submersible pump is not suitable for drinking water, but only for service water and water containing chlorine (swimming pool water) below 35°C. Likewise, it is not suitable for use in salt water, water with aggressive chemicals or water containing sand.
Buy the AL-KO Submersible Pump SUB 8500 Easy & Alternatives
Buy the SUB 8500 diving pump now in our webshop or from one of our specialist dealers. If you would like a more powerful submersible pump, we recommend the SUB 1000 DS Comfort submersible pump (item no. 112823)
|Motor power in watts||290 W|
|Max. Delivery Head in m||6 M|
|max flow rate l / h||8000 LPH|
|Length in cm||200 CM|
|Height in cm||300 CM|
|Width in cm||170 CM|
|Net Weight in kg||4 KG|
|Max. Grain Size in mm||5 MM|
|Flat Suction up to mm||5 MM|
|Max. Pressure in bar||0.6 BAR|
|Cable Length in m||10 M|
|EC Declaration of Conformity||